new member
4 posters
Page 1 of 1
new member
My name is Robin, I am from Victoria BC Canada. I just purchased a 58 D300,and will be looking for fenders and windshield. also maybe some info on the best swap for the axels to get a more common bolt pattern, the rear should be easy but I am thinking of keeping a straight axel in the front, or would it be best just to swap out the whole frame? I also have a 2013 ram 1500 regular cab short box.
robin93- Posts : 4
Join date : 2014-01-16
Location : Victoria BC Canada
Re: new member
Welcome nice 58! fenders are not to bad to find for yours since they used them from 1958-60 on the trucks and 58-66 on the Panels so should be plenty of trucks out there to cannibalize from. for other parts like the windshield any glass company should stock them, they are still reproduced. here is a list below of parts for these I made. For the frame the best swap to go with would be a early dakota frame swap, its almost the exact width and with the 5 lug pattern makes it the same as the factory halftone lugs if you want to make it a hotrod or you could go dakota 4x4…though i have never seen that done and would be cool. hope this helps.
Headliner 39inch black Link- http://www.robertsmotorparts.com/sto...ized-freight-1
Headliner 42 inch black link- http://www.robertsmotorparts.com/sto...t-than-shown-1
Headliner 42 inch grey link- http://www.robertsmotorparts.com/sto...ized-freight-1
Cowl vent seal- http://www.robertsmotorparts.com/sto...-1954-1968-1-1
Small window rubber- http://www.robertsmotorparts.com/sto...-1955-1960-1-1
Big window rubber- http://www.robertsmotorparts.com/sto...ocking-strip-1 ………..."I have used this seal and it fits great!"
Door rubber- http://www.robertsmotorparts.com/sto...ck-1954-1960-1
Rubber Floor mat- http://www.robertsmotorparts.com/sto...-1959-1960-1-1
Visor pad black- http://www.robertsmotorparts.com/sto...ck-1941-1959-1
Visor pad brown- http://www.robertsmotorparts.com/sto...ck-1941-1959-1
Headliner 39inch black Link- http://www.robertsmotorparts.com/sto...ized-freight-1
Headliner 42 inch black link- http://www.robertsmotorparts.com/sto...t-than-shown-1
Headliner 42 inch grey link- http://www.robertsmotorparts.com/sto...ized-freight-1
Cowl vent seal- http://www.robertsmotorparts.com/sto...-1954-1968-1-1
Small window rubber- http://www.robertsmotorparts.com/sto...-1955-1960-1-1
Big window rubber- http://www.robertsmotorparts.com/sto...ocking-strip-1 ………..."I have used this seal and it fits great!"
Door rubber- http://www.robertsmotorparts.com/sto...ck-1954-1960-1
Rubber Floor mat- http://www.robertsmotorparts.com/sto...-1959-1960-1-1
Visor pad black- http://www.robertsmotorparts.com/sto...ck-1941-1959-1
Visor pad brown- http://www.robertsmotorparts.com/sto...ck-1941-1959-1
MoParJoel- Posts : 115
Join date : 2013-02-07
Location : North Las Vegas
Re: new member
thanks, I'll look at the parts, is that your web site?
robin93- Posts : 4
Join date : 2014-01-16
Location : Victoria BC Canada
Re: new member
nope just a nifty site for us Dodge truck guys.
MoParJoel- Posts : 115
Join date : 2013-02-07
Location : North Las Vegas
re: your truck
Hi Robin,
I was wondering what wheels you currently have on the D-300?
Thanks!
I was wondering what wheels you currently have on the D-300?
Thanks!
57dodgertwpw- Guest
Re: new member
17's with the big bolt pattern, split rims,swapping to a Dakota chassis
robin93- Posts : 4
Join date : 2014-01-16
Location : Victoria BC Canada
Re: new member
might be interested in selling off the chassis as well as the motor and trans,315ci, 4 speed trans. Going with a Dakota chassis.
robin93- Posts : 4
Join date : 2014-01-16
Location : Victoria BC Canada
Similar topics
» new Member
» New member in the UK with a B3B 108.
» New Member from Tx.-46 DODGE
» new member from Massachusetts
» new member from mesa az
» New member in the UK with a B3B 108.
» New Member from Tx.-46 DODGE
» new member from Massachusetts
» new member from mesa az
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|