Bagged '67 D100
+6
froy
rapidtransitrick
R.A.D
RidnLow
BAMMD100
rich
10 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Re: Bagged '67 D100
Yes lots of new things!
Finally got the truck back on the road. Still needs an alignment pretty bad but so far I am really happy with everything.
Finally got the truck back on the road. Still needs an alignment pretty bad but so far I am really happy with everything.
BAMMD100- Posts : 23
Join date : 2014-10-15
Re: Bagged '67 D100
My builder owed me some money so ended up rewiring the whole truck with a Painless kit. turned out real nice and no more worrying about the old harness and connections.
BAMMD100- Posts : 23
Join date : 2014-10-15
Re: Bagged '67 D100
you'll be happy with that new harness. looks good sittin' low
RidnLow- Posts : 21
Join date : 2014-09-19
Re: Bagged '67 D100
Thanks guys! I got it aligned today and get to really do some driving. It's a blast.
BAMMD100- Posts : 23
Join date : 2014-10-15
Re: Bagged '67 D100
I haven't had a chance to take any videos yet. I have hardly taken any pictures, I have been having way to much driving it.
The harness did get put in. It is nice having all new wiring and nothing to worry about.
Oh man "whats next"? Its never ending.
Im going to put an Edelbrock intake and 750 carb on in the next week or two with all new throttle and transmission linkage.
I still need to have some frame work done. The middle crossmember is pushing the driveshaft when laid out and causing the rear seal on the trans to leak.
I also have a 70 Mustang fuel tank I would like to put under the bed and then have the rear step notch covered.
I'm also doing some interior work. Going to lay down some POR15 the dynamat the interior. Put down some new carpet and do a mexican blanket headliner and seat inserts.
Now I just need the time and money to get it all done.
The harness did get put in. It is nice having all new wiring and nothing to worry about.
Oh man "whats next"? Its never ending.
Im going to put an Edelbrock intake and 750 carb on in the next week or two with all new throttle and transmission linkage.
I still need to have some frame work done. The middle crossmember is pushing the driveshaft when laid out and causing the rear seal on the trans to leak.
I also have a 70 Mustang fuel tank I would like to put under the bed and then have the rear step notch covered.
I'm also doing some interior work. Going to lay down some POR15 the dynamat the interior. Put down some new carpet and do a mexican blanket headliner and seat inserts.
Now I just need the time and money to get it all done.
BAMMD100- Posts : 23
Join date : 2014-10-15
Re: Bagged '67 D100
And I got this little guy to help out with the work I'm going to do myself.
BAMMD100- Posts : 23
Join date : 2014-10-15
Page 2 of 2 • 1, 2
Similar topics
» lowered 1959 d100
» How about some pics of bagged 53-56 dodge trucks
» How about some pics of bagged sweptline dodge trucks
» Where can i get a rubber floor mat to fit 1967 D100 oem? molded?
» How about some pics of bagged 53-56 dodge trucks
» How about some pics of bagged sweptline dodge trucks
» Where can i get a rubber floor mat to fit 1967 D100 oem? molded?
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum
|
|